Telephone : (0115) 926 9996 If you can't see what you want - ASK!!!
A specially built 1,200Kg capacity lift table with powered
roller track. It is made for the food industry from EN 1.4301 stainless
steel (normal stainless steel 18/8).
An E12-125YSS special built lift table made from EN 1.4301 stainless steel
with specially painted cylinders and chrome plated stainless steel rods.
The lift control is by foot switch.
A number of 1,200Kg capacity lift tables being used in a process hall. The environment is extremely agressive due to concentrated salt water sprays. The working height needs constant adjustment to prevent damage to the operators' backs as the loads are heavy and difficult to handle.
General guide / information
for stainless steel and galvanised tables.
Cylinder
type
1. Complete stainless steel EN 1.4301 or EN 1.4401.
2. Standard cylinder tubes coated with corrosion resisting
primer and spray coated with a 2 component acrylic resin
paint finish, colour RAL 7032 grey. Piston rod of chrome
plated stainless steel.
Fabrication
1. Completely from EN 1.4301 or EN 1.4401
stainless steel.
2. Combination of Stainless platform and bottom frame with
hot dipped galvanised armset.
3. Hot dipped galvanised.
Bearings
All axles and cylinder bolts of stainless
steel and bearing bushes with grease points.
Power pack
We recommend placing the power pack and
control panel in a remote location or covering with a stainless
steel hood.
