Single Scissor Lift

 

  • More than 40 different types
  • Stroke approx. 0.62 x platform length
  • Upto 15 tonnes payload
  • Multi purpose use
  • Strong, reliable design
1. Flat or tear pattern deck top, The top roll over edges are square (not radius) for greater strength, smoother load transfer and flush mounting of handrail, conveyors etc.
2. A perimeter safety trip frame is fitted to the undersides of the platform to prevent further lowering should an obstruction be encountered. For added safety, operator reset is standard.
3. The scissor arms for lift tables upto 3 metres in length are usually profiled, solid steel. For larger lifts, steel hollow section is used to provide greater stability. A substantial torsion tube is fitted between the armsets to help ensure good synchronisation and stability even when eccentrically loaded.
4. Bearing Bushes (Click here)
5. The 1.400 rpm power packs are selected for their exceptional reliability and low noise (<70dBA). A built in high pressure filter helps protect the lowering valve from malfunction. The lowering speed is adjustable on site and is controlled by a pressure compensating valve. Mains supply 400V, 3 phase, 50Hz; control circuits 24V, 50 Hz. except for types marked *(230V, 1 phase, 50Hz), Each lift is protected to IP54 and is ready to use when connected to a mains supply and suitably installed. The control station is on 3 metres of flexible cable complete with Emergency Stop and deadman (constant pressure) UP and DOWN push buttons.
6. Steel swivel stops or posts are provided to mechanically support the lift in a raised or semi-raised position to allow access for maintenance purposes.
7. The steel arm roller bearings are replaceable.
8. Cylinder Tubes (Click here)

 

 

 

Single Scissor Lift
Stainless Steel Single Scissor Lift
4 Tonnes U.D.L
For feeding steel sheet in machine shop
VW works.

Heavy Duty Single Scissor Lift

5 Tonnes U.D.L
4000 mm long x 1500 mm wide
2500 mm stroke.


Single Sicissor Range Details

Type
L x W (mm)
Stroke (mm)
<H (mm)
Load (kg)
Time (sec)
Motor (kW)
Weight (kg)
EL5-80
1000x800
600
190
500
10
0.75
140
EL10-80
1000x800
600
190
1000
14
0.75
160
EL5-100
1250x800
800
190
500
10
0.75
180
EL10-100
1250x800
800
190
1000
16
0.75
210
EL20-100
1250x800
780
220
2000
32
0.75
270
EL30-95
1250x800
700
240
3000
18
1.5
280
EL10-125
1600x800
1000
230
1000
24
0.75
320
EL20-125
1600x300
1000
240
2000
48
0.75
350
EL30-125
1600x1000
970
280
3000
48
0.75
450
EL20-160
2000x1000
1300
280
2000
30
1.5
700
EL30-165
2000x1250
1250
350
3000
45
1.5
900
EL10-195
2500x1000
1600
280
1000
30
1.5
700
EL20-195
2500x1250
1600
360
2000
45
1.5
900
EL30-195
2500x1250
1570
380
3000
55
1.5
1000